|
|
SparkFun Accessories Screw Terminals 5mm Pitch (2-Pin)
- PRT-08432
- SparkFun
-
1:
0,946 €
-
48In Stock
|
Mouser Part No
474-PRT-08432
|
SparkFun
|
SparkFun Accessories Screw Terminals 5mm Pitch (2-Pin)
|
|
48In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
Connectors
|
Fixed Terminal Blocks
|
|
|
|
SparkFun Accessories This is a SparkFun exclusive! These are 155mm long jumpers. Multiple jumpers can be installed next to one another on a 0.1" header. Comes as 1 package of one hundred jumpers (colors shown) 50 pieces male-to-male and 50 pieces female-to-female.Dimens
- PRT-09194
- SparkFun
-
1:
28,81 €
-
1In Stock
|
Mouser Part No
474-PRT-09194
|
SparkFun
|
SparkFun Accessories This is a SparkFun exclusive! These are 155mm long jumpers. Multiple jumpers can be installed next to one another on a 0.1" header. Comes as 1 package of one hundred jumpers (colors shown) 50 pieces male-to-male and 50 pieces female-to-female.Dimens
|
|
1In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
Wire & Cable
|
Jumper Wire
|
|
|
|
SparkFun Accessories This is a SparkFun exclusive! These are 12" long jumper wires terminated as male to female. Use these to jumper from any male or female header on any board. Multiple jumpers can be connected next to one another on a 0.1" header. Comes in five packs o
- PRT-09386
- SparkFun
-
1:
32,64 €
-
1In Stock
|
Mouser Part No
474-PRT-09386
|
SparkFun
|
SparkFun Accessories This is a SparkFun exclusive! These are 12" long jumper wires terminated as male to female. Use these to jumper from any male or female header on any board. Multiple jumpers can be connected next to one another on a 0.1" header. Comes in five packs o
|
|
1In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
Wire & Cable
|
Jumper Wire
|
|
|
|
SparkFun Accessories This is a SparkFun exclusive! These are 12" long jumper wires terminated as female to female. Use these to jumper from any male header on any board. Multiple jumpers can be connected next to one another on a 0.1" header. Comes in one package of ten j
- PRT-09389
- SparkFun
-
1:
4,26 €
-
12In Stock
|
Mouser Part No
474-PRT-09389
|
SparkFun
|
SparkFun Accessories This is a SparkFun exclusive! These are 12" long jumper wires terminated as female to female. Use these to jumper from any male header on any board. Multiple jumpers can be connected next to one another on a 0.1" header. Comes in one package of ten j
|
|
12In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
Wire & Cable
|
Jumper Wire
|
|
|
|
SparkFun Accessories This is a SparkFun exclusive! These are 12" long jumper wires terminated as female to female. Use these to jumper from any male header on any board. Multiple jumpers can be connected next to one another on a 0.1" header. Comes in five packs of twenty
- PRT-09390
- SparkFun
-
1:
32,64 €
-
3In Stock
|
Mouser Part No
474-PRT-09390
|
SparkFun
|
SparkFun Accessories This is a SparkFun exclusive! These are 12" long jumper wires terminated as female to female. Use these to jumper from any male header on any board. Multiple jumpers can be connected next to one another on a 0.1" header. Comes in five packs of twenty
|
|
3In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
Wire & Cable
|
Jumper Wire
|
|
|
|
SparkFun Accessories 9V to Barrel Jack Adapter
- PRT-09518
- SparkFun
-
1:
3,10 €
-
12In Stock
|
Mouser Part No
474-PRT-09518
|
SparkFun
|
SparkFun Accessories 9V to Barrel Jack Adapter
|
|
12In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
Adapters
|
DC Power Cords
|
|
|
|
SparkFun Accessories This is a simple two wire cable. Great for jumping from board to board or just about anything else. There is a 2-pin JST connector on one end bare cable on the opposite end. It also comes with the mating connector for the JST.Dimensions: 6" lengthDo
- PRT-09914
- SparkFun
-
1:
1,08 €
-
251In Stock
|
Mouser Part No
474-PRT-09914
|
SparkFun
|
SparkFun Accessories This is a simple two wire cable. Great for jumping from board to board or just about anything else. There is a 2-pin JST connector on one end bare cable on the opposite end. It also comes with the mating connector for the JST.Dimensions: 6" lengthDo
|
|
251In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
Wire & Cable
|
Jumper Wire
|
|
|
|
SparkFun Accessories This is a simple two wire cable. Great for jumping from board to board or just about anything else. There is a 2-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 4" lengthDocuments:D
- PRT-10362
- SparkFun
-
1:
1,08 €
-
65In Stock
|
Mouser Part No
474-PRT-10362
|
SparkFun
|
SparkFun Accessories This is a simple two wire cable. Great for jumping from board to board or just about anything else. There is a 2-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 4" lengthDocuments:D
|
|
65In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
Wire & Cable
|
Jumper Wire
|
|
|
|
SparkFun Accessories This is a simple three wire cable. Great for jumping from board to board or just about anything else. There is a 3-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 4" lengthDocuments
- PRT-10363
- SparkFun
-
1:
1,31 €
-
85In Stock
|
Mouser Part No
474-PRT-10363
|
SparkFun
|
SparkFun Accessories This is a simple three wire cable. Great for jumping from board to board or just about anything else. There is a 3-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 4" lengthDocuments
|
|
85In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
Wire & Cable
|
Jumper Wire
|
|
|
|
SparkFun Accessories This is a simple four wire cable. Great for jumping from board to board or just about anything else. There is a 4-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 4" lengthDocuments:
- PRT-10364
- SparkFun
-
1:
1,34 €
-
81In Stock
|
Mouser Part No
474-PRT-10364
|
SparkFun
|
SparkFun Accessories This is a simple four wire cable. Great for jumping from board to board or just about anything else. There is a 4-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 4" lengthDocuments:
|
|
81In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
Wire & Cable
|
Jumper Wire
|
|
|
|
SparkFun Accessories This is a simple five wire cable. Great for jumping from board to board or just about anything else. There is a 5-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 4" lengthDocuments:
- PRT-10365
- SparkFun
-
1:
1,40 €
-
58In Stock
|
Mouser Part No
474-PRT-10365
|
SparkFun
|
SparkFun Accessories This is a simple five wire cable. Great for jumping from board to board or just about anything else. There is a 5-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 4" lengthDocuments:
|
|
58In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
Wire & Cable
|
Jumper Wire
|
|
|
|
SparkFun Accessories This is a simple six wire cable. Great for jumping from board to board or just about anything else. There is a 6-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 4" lengthDocuments:D
- PRT-10366
- SparkFun
-
1:
1,38 €
-
173In Stock
|
Mouser Part No
474-PRT-10366
|
SparkFun
|
SparkFun Accessories This is a simple six wire cable. Great for jumping from board to board or just about anything else. There is a 6-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 4" lengthDocuments:D
|
|
173In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
Wire & Cable
|
Jumper Wire
|
|
|
|
SparkFun Accessories This is a simple two wire cable. Great for jumping from board to board or just about anything else. There is a 2-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 6" lengthDocuments:D
- PRT-10367
- SparkFun
-
1:
1,74 €
-
63In Stock
|
Mouser Part No
474-PRT-10367
|
SparkFun
|
SparkFun Accessories This is a simple two wire cable. Great for jumping from board to board or just about anything else. There is a 2-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 6" lengthDocuments:D
|
|
63In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
Wire & Cable
|
Jumper Wire
|
|
|
|
SparkFun Accessories This is a simple three wire cable. Great for jumping from board to board or just about anything else. There is a 3-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 6" lengthDocuments
- PRT-10368
- SparkFun
-
1:
1,77 €
-
39In Stock
|
Mouser Part No
474-PRT-10368
|
SparkFun
|
SparkFun Accessories This is a simple three wire cable. Great for jumping from board to board or just about anything else. There is a 3-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 6" lengthDocuments
|
|
39In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
Wire & Cable
|
Jumper Wire
|
|
|
|
SparkFun Accessories This is a simple four wire cable. Great for jumping from board to board or just about anything else. There is a 4-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 6" lengthDocuments:
- PRT-10369
- SparkFun
-
1:
1,78 €
-
169In Stock
|
Mouser Part No
474-PRT-10369
|
SparkFun
|
SparkFun Accessories This is a simple four wire cable. Great for jumping from board to board or just about anything else. There is a 4-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 6" lengthDocuments:
|
|
169In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
Wire & Cable
|
Jumper Wire
|
|
|
|
SparkFun Accessories This is a simple five wire cable. Great for jumping from board to board or just about anything else. There is a 5-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 6" lengthDocuments:
- PRT-10370
- SparkFun
-
1:
2,08 €
-
89In Stock
|
Mouser Part No
474-PRT-10370
|
SparkFun
|
SparkFun Accessories This is a simple five wire cable. Great for jumping from board to board or just about anything else. There is a 5-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 6" lengthDocuments:
|
|
89In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
Wire & Cable
|
Jumper Wire
|
|
|
|
SparkFun Accessories This is a simple six wire cable. Great for jumping from board to board or just about anything else. There is a 6-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 6" lengthDocuments:D
- PRT-10371
- SparkFun
-
1:
1,81 €
-
152In Stock
-
60On Order
|
Mouser Part No
474-PRT-10371
|
SparkFun
|
SparkFun Accessories This is a simple six wire cable. Great for jumping from board to board or just about anything else. There is a 6-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 6" lengthDocuments:D
|
|
152In Stock
60On Order
|
|
Min.: 1
Mult.: 1
|
|
|
Wire & Cable
|
Jumper Wire
|
|
|
|
SparkFun Accessories This is a simple two wire cable. Great for jumping from board to board or just about anything else. There is a 2-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 12" lengthDocuments:
- PRT-10372
- SparkFun
-
1:
2,15 €
-
304In Stock
|
Mouser Part No
474-PRT-10372
|
SparkFun
|
SparkFun Accessories This is a simple two wire cable. Great for jumping from board to board or just about anything else. There is a 2-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 12" lengthDocuments:
|
|
304In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
Wire & Cable
|
Jumper Wire
|
|
|
|
SparkFun Accessories This is a simple three wire cable. Great for jumping from board to board or just about anything else. There is a 3-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 12" lengthDocument
- PRT-10373
- SparkFun
-
1:
2,15 €
-
84In Stock
|
Mouser Part No
474-PRT-10373
|
SparkFun
|
SparkFun Accessories This is a simple three wire cable. Great for jumping from board to board or just about anything else. There is a 3-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 12" lengthDocument
|
|
84In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
Wire & Cable
|
Jumper Wire
|
|
|
|
SparkFun Accessories This is a simple four wire cable. Great for jumping from board to board or just about anything else. There is a 4-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 12" lengthDocuments
- PRT-10374
- SparkFun
-
1:
2,37 €
-
87In Stock
|
Mouser Part No
474-PRT-10374
|
SparkFun
|
SparkFun Accessories This is a simple four wire cable. Great for jumping from board to board or just about anything else. There is a 4-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 12" lengthDocuments
|
|
87In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
Wire & Cable
|
Jumper Wire
|
|
|
|
SparkFun Accessories This is a simple five wire cable. Great for jumping from board to board or just about anything else. There is a 5-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 12" lengthDocuments
- PRT-10375
- SparkFun
-
1:
2,54 €
-
32In Stock
|
Mouser Part No
474-PRT-10375
|
SparkFun
|
SparkFun Accessories This is a simple five wire cable. Great for jumping from board to board or just about anything else. There is a 5-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 12" lengthDocuments
|
|
32In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
Wire & Cable
|
Jumper Wire
|
|
|
|
SparkFun Accessories This is a simple six wire cable. Great for jumping from board to board or just about anything else. There is a 6-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 12" lengthDocuments:
- PRT-10376
- SparkFun
-
1:
2,37 €
-
97In Stock
|
Mouser Part No
474-PRT-10376
|
SparkFun
|
SparkFun Accessories This is a simple six wire cable. Great for jumping from board to board or just about anything else. There is a 6-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 12" lengthDocuments:
|
|
97In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
Wire & Cable
|
Jumper Wire
|
|
|
|
SparkFun Accessories This DC power jack/connector is just like the other one that we carry except that it's terminated with breadboard-friendly pins instead of wide solder terminals. These are also compatible with our DC wall supplies and have a 5.5mm jack with a 2.1mm
- PRT-10811
- SparkFun
-
1:
0,85 €
-
517In Stock
|
Mouser Part No
474-PRT-10811
|
SparkFun
|
SparkFun Accessories This DC power jack/connector is just like the other one that we carry except that it's terminated with breadboard-friendly pins instead of wide solder terminals. These are also compatible with our DC wall supplies and have a 5.5mm jack with a 2.1mm
|
|
517In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
Adapters
|
DC Power Connectors
|
|
|
|
SparkFun Accessories These are 155mm long jumpers terminated as male to male. Use these to jumper from any female header on any board to any other female header. Multiple jumpers can be installed next to one another on a 0.1" header. Comes as 1 package of one hundred ju
- PRT-10897
- SparkFun
-
1:
23,65 €
-
5In Stock
-
6On Order
|
Mouser Part No
474-PRT-10897
|
SparkFun
|
SparkFun Accessories These are 155mm long jumpers terminated as male to male. Use these to jumper from any female header on any board to any other female header. Multiple jumpers can be installed next to one another on a 0.1" header. Comes as 1 package of one hundred ju
|
|
5In Stock
6On Order
|
|
Min.: 1
Mult.: 1
|
|
|
Wire & Cable
|
Jumper Wire
|
|
|
|
SparkFun Accessories These are 155mm long jumpers terminated as female to female. Use these to jumper from any male header on any board to any other male header. Multiple jumpers can be installed next to one another on a 0.1" header. Comes as 1 package of one hundred ju
- PRT-10898
- SparkFun
-
1:
23,65 €
-
9In Stock
|
Mouser Part No
474-PRT-10898
|
SparkFun
|
SparkFun Accessories These are 155mm long jumpers terminated as female to female. Use these to jumper from any male header on any board to any other male header. Multiple jumpers can be installed next to one another on a 0.1" header. Comes as 1 package of one hundred ju
|
|
9In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
Wire & Cable
|
Jumper Wire
|
|
Finland