|
|
SparkFun Accessories SOIC to DIP Adapter - 28-Pin
- BOB-00496
- SparkFun
-
1:
5,12 €
-
13In Stock
-
25On Order
|
Mouser Part No
474-BOB-00496
|
SparkFun
|
SparkFun Accessories SOIC to DIP Adapter - 28-Pin
|
|
13In Stock
25On Order
|
|
Min.: 1
Mult.: 1
|
|
Adapters
|
|
|
|
|
SparkFun Accessories This is a simple two wire cable. Great for jumping from board to board or just about anything else. There is a 2-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 12" lengthDocuments:
- PRT-10372
- SparkFun
-
1:
2,15 €
-
305In Stock
|
Mouser Part No
474-PRT-10372
|
SparkFun
|
SparkFun Accessories This is a simple two wire cable. Great for jumping from board to board or just about anything else. There is a 2-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 12" lengthDocuments:
|
|
305In Stock
|
|
Min.: 1
Mult.: 1
|
|
Wire & Cable
|
Jumper Wire
|
|
|
|
SparkFun Accessories This is a simple two wire cable. Great for jumping from board to board or just about anything else. There is a 2-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 6" lengthDocuments:D
- PRT-10367
- SparkFun
-
1:
1,74 €
-
63In Stock
|
Mouser Part No
474-PRT-10367
|
SparkFun
|
SparkFun Accessories This is a simple two wire cable. Great for jumping from board to board or just about anything else. There is a 2-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 6" lengthDocuments:D
|
|
63In Stock
|
|
Min.: 1
Mult.: 1
|
|
Wire & Cable
|
Jumper Wire
|
|
|
|
SparkFun Accessories This is a simple six wire cable. Great for jumping from board to board or just about anything else. There is a 6-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 12" lengthDocuments:
- PRT-10376
- SparkFun
-
1:
2,37 €
-
97In Stock
|
Mouser Part No
474-PRT-10376
|
SparkFun
|
SparkFun Accessories This is a simple six wire cable. Great for jumping from board to board or just about anything else. There is a 6-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 12" lengthDocuments:
|
|
97In Stock
|
|
Min.: 1
Mult.: 1
|
|
Wire & Cable
|
Jumper Wire
|
|
|
|
SparkFun Accessories These are nice cross-locking curved tweezers unlike traditional models the tips on these tweezers will remain closed until squeezed open. They have a very fine tip which allows you to pick up very small parts with precision. This is a great tool t
- TOL-12572
- SparkFun
-
1:
4,09 €
-
11In Stock
|
Mouser Part No
474-TOL-12572
|
SparkFun
|
SparkFun Accessories These are nice cross-locking curved tweezers unlike traditional models the tips on these tweezers will remain closed until squeezed open. They have a very fine tip which allows you to pick up very small parts with precision. This is a great tool t
|
|
11In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
|
|
SparkFun Accessories These are nice cross-locking straight tweezers unlike traditional models the tips on these tweezers will remain closed until squeezed open. They have a very fine tip which allows you to pick up very small parts with precision. This is a great tool
- TOL-12573
- SparkFun
-
1:
4,09 €
-
5In Stock
|
Mouser Part No
474-TOL-12573
|
SparkFun
|
SparkFun Accessories These are nice cross-locking straight tweezers unlike traditional models the tips on these tweezers will remain closed until squeezed open. They have a very fine tip which allows you to pick up very small parts with precision. This is a great tool
|
|
5In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
|
|
SparkFun Accessories These 33mm (1.3") spring loaded pogo pins are great for programming and applications where you don't always want headers soldered onto your boards. We use them for our programming jigs in production. The pins fit snugly into most standard perf board
- PRT-09174
- SparkFun
-
1:
1,29 €
-
59In Stock
|
Mouser Part No
474-PRT-09174
|
SparkFun
|
SparkFun Accessories These 33mm (1.3") spring loaded pogo pins are great for programming and applications where you don't always want headers soldered onto your boards. We use them for our programming jigs in production. The pins fit snugly into most standard perf board
|
|
59In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
|
|
SparkFun Accessories This is a simple three wire cable. Great for jumping from board to board or just about anything else. There is a 3-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 4" lengthDocuments
- PRT-10363
- SparkFun
-
1:
1,31 €
-
85In Stock
|
Mouser Part No
474-PRT-10363
|
SparkFun
|
SparkFun Accessories This is a simple three wire cable. Great for jumping from board to board or just about anything else. There is a 3-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 4" lengthDocuments
|
|
85In Stock
|
|
Min.: 1
Mult.: 1
|
|
Wire & Cable
|
Jumper Wire
|
|
|
|
SparkFun Accessories This is a simple four wire cable. Great for jumping from board to board or just about anything else. There is a 4-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 4" lengthDocuments:
- PRT-10364
- SparkFun
-
1:
1,34 €
-
101In Stock
|
Mouser Part No
474-PRT-10364
|
SparkFun
|
SparkFun Accessories This is a simple four wire cable. Great for jumping from board to board or just about anything else. There is a 4-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 4" lengthDocuments:
|
|
101In Stock
|
|
Min.: 1
Mult.: 1
|
|
Wire & Cable
|
Jumper Wire
|
|
|
|
SparkFun Accessories This is a simple five wire cable. Great for jumping from board to board or just about anything else. There is a 5-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 4" lengthDocuments:
- PRT-10365
- SparkFun
-
1:
1,40 €
-
58In Stock
|
Mouser Part No
474-PRT-10365
|
SparkFun
|
SparkFun Accessories This is a simple five wire cable. Great for jumping from board to board or just about anything else. There is a 5-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 4" lengthDocuments:
|
|
58In Stock
|
|
Min.: 1
Mult.: 1
|
|
Wire & Cable
|
Jumper Wire
|
|
|
|
SparkFun Accessories This is a simple four wire cable. Great for jumping from board to board or just about anything else. There is a 4-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 6" lengthDocuments:
- PRT-10369
- SparkFun
-
1:
1,78 €
-
169In Stock
|
Mouser Part No
474-PRT-10369
|
SparkFun
|
SparkFun Accessories This is a simple four wire cable. Great for jumping from board to board or just about anything else. There is a 4-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 6" lengthDocuments:
|
|
169In Stock
|
|
Min.: 1
Mult.: 1
|
|
Wire & Cable
|
Jumper Wire
|
|
|
|
SparkFun Accessories This is a simple six wire cable. Great for jumping from board to board or just about anything else. There is a 6-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 6" lengthDocuments:D
- PRT-10371
- SparkFun
-
1:
1,81 €
-
152In Stock
-
60On Order
|
Mouser Part No
474-PRT-10371
|
SparkFun
|
SparkFun Accessories This is a simple six wire cable. Great for jumping from board to board or just about anything else. There is a 6-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 6" lengthDocuments:D
|
|
152In Stock
60On Order
|
|
Min.: 1
Mult.: 1
|
|
Wire & Cable
|
Jumper Wire
|
|
|
|
SparkFun Accessories This is a simple three wire cable. Great for jumping from board to board or just about anything else. There is a 3-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 12" lengthDocument
- PRT-10373
- SparkFun
-
1:
2,15 €
-
84In Stock
|
Mouser Part No
474-PRT-10373
|
SparkFun
|
SparkFun Accessories This is a simple three wire cable. Great for jumping from board to board or just about anything else. There is a 3-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 12" lengthDocument
|
|
84In Stock
|
|
Min.: 1
Mult.: 1
|
|
Wire & Cable
|
Jumper Wire
|
|
|
|
SparkFun Accessories This is a simple four wire cable. Great for jumping from board to board or just about anything else. There is a 4-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 12" lengthDocuments
- PRT-10374
- SparkFun
-
1:
2,37 €
-
97In Stock
|
Mouser Part No
474-PRT-10374
|
SparkFun
|
SparkFun Accessories This is a simple four wire cable. Great for jumping from board to board or just about anything else. There is a 4-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 12" lengthDocuments
|
|
97In Stock
|
|
Min.: 1
Mult.: 1
|
|
Wire & Cable
|
Jumper Wire
|
|
|
|
SparkFun Accessories This is a simple six wire cable. Great for jumping from board to board or just about anything else. There is a 6-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 4" lengthDocuments:D
- PRT-10366
- SparkFun
-
1:
1,38 €
-
173In Stock
|
Mouser Part No
474-PRT-10366
|
SparkFun
|
SparkFun Accessories This is a simple six wire cable. Great for jumping from board to board or just about anything else. There is a 6-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 4" lengthDocuments:D
|
|
173In Stock
|
|
Min.: 1
Mult.: 1
|
|
Wire & Cable
|
Jumper Wire
|
|
|
|
SparkFun Accessories This is a simple five wire cable. Great for jumping from board to board or just about anything else. There is a 5-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 12" lengthDocuments
- PRT-10375
- SparkFun
-
1:
2,54 €
-
42In Stock
|
Mouser Part No
474-PRT-10375
|
SparkFun
|
SparkFun Accessories This is a simple five wire cable. Great for jumping from board to board or just about anything else. There is a 5-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 12" lengthDocuments
|
|
42In Stock
|
|
Min.: 1
Mult.: 1
|
|
Wire & Cable
|
Jumper Wire
|
|
|
|
SparkFun Accessories Give your custom enclosure a professional finish. This panel-mount extension cable bridges the gap between your project's internal USB Micro-B port and an external USB-B connection keeping your connections secure and accessible. Whether you are boxi
- CAB-15463
- SparkFun
-
1:
3,35 €
-
71In Stock
|
Mouser Part No
474-CAB-15463
|
SparkFun
|
SparkFun Accessories Give your custom enclosure a professional finish. This panel-mount extension cable bridges the gap between your project's internal USB Micro-B port and an external USB-B connection keeping your connections secure and accessible. Whether you are boxi
|
|
71In Stock
|
|
Min.: 1
Mult.: 1
|
|
Cables
|
Panel Mount USB-B to Micro-B Cable - 6 in
|
|
|
|
SparkFun Accessories Surface mount 3-way switch. These switches are commonly found on handheld devices like MP3 players. This switch allows the user to navigate using up and down selections then select by pressing the plastic piece inwards. Capable of swtiching up to 1.2
- COM-08184
- SparkFun
-
1:
1,51 €
-
366In Stock
|
Mouser Part No
474-COM-08184
|
SparkFun
|
SparkFun Accessories Surface mount 3-way switch. These switches are commonly found on handheld devices like MP3 players. This switch allows the user to navigate using up and down selections then select by pressing the plastic piece inwards. Capable of swtiching up to 1.2
|
|
366In Stock
|
|
Min.: 1
Mult.: 1
|
|
Switches
|
|
|
|
|
SparkFun Accessories You can tell by our large assortment of tweezers that we here at SparkFun are way into picking up tiny things. To make sure we're always up to date on the latest in 'tweezing' technology we're always buying and testing new tweezers. Okay... tweezers
- TOL-10602
- SparkFun
-
1:
4,09 €
-
70In Stock
|
Mouser Part No
474-TOL-10602
|
SparkFun
|
SparkFun Accessories You can tell by our large assortment of tweezers that we here at SparkFun are way into picking up tiny things. To make sure we're always up to date on the latest in 'tweezing' technology we're always buying and testing new tweezers. Okay... tweezers
|
|
70In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
|
|
SparkFun Accessories We use barrel jacks a lot around here and sometimes we need to pop a switch into the mix. That usually means hacking up a perfectly good barrel jack extension cable but the whole point of using the barrel jacks was so that we wouldn't have to hack t
- COM-11705
- SparkFun
-
1:
3,01 €
-
84In Stock
|
Mouser Part No
474-COM-11705
|
SparkFun
|
SparkFun Accessories We use barrel jacks a lot around here and sometimes we need to pop a switch into the mix. That usually means hacking up a perfectly good barrel jack extension cable but the whole point of using the barrel jacks was so that we wouldn't have to hack t
|
|
84In Stock
|
|
Min.: 1
Mult.: 1
|
|
Switches
|
|
|
|
|
SparkFun Accessories Alligator Clip with Pigtail 4 Pack
- CAB-13191
- SparkFun
-
1:
4,15 €
-
26In Stock
|
Mouser Part No
474-CAB-13191
|
SparkFun
|
SparkFun Accessories Alligator Clip with Pigtail 4 Pack
|
|
26In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
|
|
SparkFun Accessories Description: This is one giant solderless breadboard! It has 7 power buses 40 columns and 63 rows - with a total of 3220 tie in points. All pins are spaced by a standard 0.1". The two sets of five columns are separated by about 0.3" perfect for st
- PRT-12614
- SparkFun
-
1:
27,87 €
-
19In Stock
|
Mouser Part No
474-PRT-12614
|
SparkFun
|
SparkFun Accessories Description: This is one giant solderless breadboard! It has 7 power buses 40 columns and 63 rows - with a total of 3220 tie in points. All pins are spaced by a standard 0.1". The two sets of five columns are separated by about 0.3" perfect for st
|
|
19In Stock
|
|
Min.: 1
Mult.: 1
|
|
Breadboards
|
|
|
|
|
SparkFun Accessories This is a 10-pack of wires that are pre-terminated with an alligator clip on one end and a female header on the other. Alligator clips are a staple item for any workbench or makerspace and with these cables you will be able to easily incorporate tho
- CAB-15186
- SparkFun
-
1:
6,76 €
-
11In Stock
|
Mouser Part No
474-CAB-15186
|
SparkFun
|
SparkFun Accessories This is a 10-pack of wires that are pre-terminated with an alligator clip on one end and a female header on the other. Alligator clips are a staple item for any workbench or makerspace and with these cables you will be able to easily incorporate tho
|
|
11In Stock
|
|
Min.: 1
Mult.: 1
|
|
Test & Measurement
|
Alligator Clip with Female Header
|
|
|
|
SparkFun Accessories Heating Pad - 5x15cm
- COM-11289
- SparkFun
-
1:
5,26 €
-
8In Stock
-
25On Order
|
Mouser Part No
474-COM-11289
|
SparkFun
|
SparkFun Accessories Heating Pad - 5x15cm
|
|
8In Stock
25On Order
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
|
|
SparkFun Accessories Tactile Button Assortment
- COM-10302
- SparkFun
-
1:
7,44 €
-
23In Stock
|
Mouser Part No
474-COM-10302
|
SparkFun
|
SparkFun Accessories Tactile Button Assortment
|
|
23In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Finland
