|
|
SparkFun Accessories This is an interface cable for the Bus Pirate designed to connect to its 2x5 I/O header. The cable's connector is composed of two rows of five 0.1" spaced pins; it's also polarized as is the mating connector on-board the Bus Pirate so you can only
- CAB-09556
- SparkFun
-
1:
4,95 €
-
48In Stock
|
Mouser Part No
474-CAB-09556
|
SparkFun
|
SparkFun Accessories This is an interface cable for the Bus Pirate designed to connect to its 2x5 I/O header. The cable's connector is composed of two rows of five 0.1" spaced pins; it's also polarized as is the mating connector on-board the Bus Pirate so you can only
|
|
48In Stock
|
|
Min.: 1
Mult.: 1
|
|
Cables
|
|
|
|
|
SparkFun Accessories This is a translucent silicon rubber button pad with 16 buttons originally inspired by the folks at monome.org. Each button has a hole underneath that accepts either a 3mm or 5mm standard LED. The idea is that you can create a button interface of you
- COM-07835
- SparkFun
-
1:
5,40 €
-
11In Stock
|
Mouser Part No
474-COM-07835
|
SparkFun
|
SparkFun Accessories This is a translucent silicon rubber button pad with 16 buttons originally inspired by the folks at monome.org. Each button has a hole underneath that accepts either a 3mm or 5mm standard LED. The idea is that you can create a button interface of you
|
|
11In Stock
|
|
Min.: 1
Mult.: 1
|
|
Optoelectronics
|
LED
|
|
|
|
SparkFun Accessories SOIC to DIP Adapter - 28-Pin
- BOB-00496
- SparkFun
-
1:
5,12 €
-
13In Stock
-
25On Order
|
Mouser Part No
474-BOB-00496
|
SparkFun
|
SparkFun Accessories SOIC to DIP Adapter - 28-Pin
|
|
13In Stock
25On Order
|
|
Min.: 1
Mult.: 1
|
|
Adapters
|
|
|
|
|
SparkFun Accessories Buttons are an easy and tactile way to interface with your project but why would you want to deal with debouncing polling and wiring up pull-up resistors? The Qwiic Button with built-in green LED simplifies all of those nasty worries away into an
- BOB-16842
- SparkFun
-
1:
4,91 €
-
23In Stock
|
Mouser Part No
474-BOB-16842
|
SparkFun
|
SparkFun Accessories Buttons are an easy and tactile way to interface with your project but why would you want to deal with debouncing polling and wiring up pull-up resistors? The Qwiic Button with built-in green LED simplifies all of those nasty worries away into an
|
|
23In Stock
|
|
Min.: 1
Mult.: 1
|
|
Qwiic Button with Green LEDs
|
|
|
|
|
SparkFun Accessories Buttons are an easy and tactile way to interface with your project but why deal with debouncing polling and wiring up pull-up resistors? The SparkFun Qwiic Button Breakout simplifies all those worries away into an easy-to-use I2C device. Utilizing
- BOB-15931
- SparkFun
-
1:
3,82 €
-
17In Stock
|
Mouser Part No
474-BOB-15931
|
SparkFun
|
SparkFun Accessories Buttons are an easy and tactile way to interface with your project but why deal with debouncing polling and wiring up pull-up resistors? The SparkFun Qwiic Button Breakout simplifies all those worries away into an easy-to-use I2C device. Utilizing
|
|
17In Stock
|
|
Min.: 1
Mult.: 1
|
|
Breakout Boards
|
|
|
|
|
SparkFun Accessories SOIC to DIP Adapter - 20-Pin
- BOB-00495
- SparkFun
-
1:
4,26 €
-
25In Stock
|
Mouser Part No
474-BOB-00495
|
SparkFun
|
SparkFun Accessories SOIC to DIP Adapter - 20-Pin
|
|
25In Stock
|
|
Min.: 1
Mult.: 1
|
|
Adapters
|
|
|
|
|
Crowd Supply Accessories Plug and play device between hardware and audiovisual software. Set contains Pipo Motion, Pipo Analog, Pipo Range
- PIPO-SET
- Pipo Interfaces
-
1:
340,59 €
-
Lead-Time 7 Weeks
-
New Product
|
Mouser Part No
392-PIPO-SET
New Product
|
Pipo Interfaces
|
Crowd Supply Accessories Plug and play device between hardware and audiovisual software. Set contains Pipo Motion, Pipo Analog, Pipo Range
|
|
Lead-Time 7 Weeks
|
|
Min.: 1
Mult.: 1
|
|
Accessories
|
Plug and Play Devices
|
|
|
|
Crowd Supply Accessories A complete Pipo Motion device kit. Comes with its case, battery, and a strap to fix it anywhere you like..
- PIPO-MOTION-A
- Pipo Interfaces
-
1:
136,75 €
-
Lead-Time 7 Weeks
-
New Product
|
Mouser Part No
392-PIPO-MOTION-A
New Product
|
Pipo Interfaces
|
Crowd Supply Accessories A complete Pipo Motion device kit. Comes with its case, battery, and a strap to fix it anywhere you like..
|
|
Lead-Time 7 Weeks
|
|
Min.: 1
Mult.: 1
|
|
PIPO Modules
|
Wireless MIDI & OSC Sensing
|
|
|
|
SparkFun Accessories This is a 16 character by 2 line display that runs at 3.3V. Utilizes the common ST7066/HD44780 parallel interface (datasheet). Interface code is widely available for many different controllers and systems. You will need 11 general I/O pins to interf
- LCD-09053
- SparkFun
-
1:
19,35 €
-
|
Mouser Part No
474-LCD-09053
|
SparkFun
|
SparkFun Accessories This is a 16 character by 2 line display that runs at 3.3V. Utilizes the common ST7066/HD44780 parallel interface (datasheet). Interface code is widely available for many different controllers and systems. You will need 11 general I/O pins to interf
|
|
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
|
|
DFRobot Accessories Interface Cable SMA to U.FL
- FIT0219
- DFRobot
-
1:
2,97 €
-
Non-Stocked
|
Mouser Part No
426-FIT0219
|
DFRobot
|
DFRobot Accessories Interface Cable SMA to U.FL
|
|
Non-Stocked
|
|
Min.: 1
Mult.: 1
|
|
Cables
|
|
|
|
|
SparkFun Accessories The MPL115A1 is a digital barometer that uses MEMs technology to give accurate pressure measurements between 50kPa and 115kPa. We stock the SPI interface version of the sensor. Average current consumption is 10 A at one measurement per second.The se
- SEN-09602
- SparkFun
-
1:
7,83 €
-
Non-Stocked
|
Mouser Part No
474-SEN-09602
|
SparkFun
|
SparkFun Accessories The MPL115A1 is a digital barometer that uses MEMs technology to give accurate pressure measurements between 50kPa and 115kPa. We stock the SPI interface version of the sensor. Average current consumption is 10 A at one measurement per second.The se
|
|
Non-Stocked
|
|
Min.: 1
Mult.: 1
|
|
Sensors
|
|
|
|
|
SparkFun Accessories This is a simple 2x8 male PTH header. This header is that you will find commonly used to interface with a basic 8x2 character LCDs. Each pin has a spacing of 0.1" in between each other.Documents:Datasheet
- PRT-13156
- SparkFun
-
1:
0,817 €
-
Non-Stocked
|
Mouser Part No
474-PRT-13156
|
SparkFun
|
SparkFun Accessories This is a simple 2x8 male PTH header. This header is that you will find commonly used to interface with a basic 8x2 character LCDs. Each pin has a spacing of 0.1" in between each other.Documents:Datasheet
|
|
Non-Stocked
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
|
|
SparkFun Accessories These are small spring terminals. Open the aperature with the small arm insert the wire release the arm and the wire is held firmly in place. This is a good quick way to to interface to bare wires. Capable of higher current and more resilient than
- PRT-08073
- SparkFun
-
1:
1,51 €
-
Non-Stocked
|
Mouser Part No
474-PRT-08073
|
SparkFun
|
SparkFun Accessories These are small spring terminals. Open the aperature with the small arm insert the wire release the arm and the wire is held firmly in place. This is a good quick way to to interface to bare wires. Capable of higher current and more resilient than
|
|
Non-Stocked
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
|
|
SparkFun Accessories These are small spring terminals. Open the aperature with the small arm insert the wire release the arm and the wire is held firmly in place. This is a good quick way to to interface to bare wires. Capable of higher current and more resilient than
- PRT-08074
- SparkFun
-
1:
1,68 €
-
Non-Stocked
|
Mouser Part No
474-PRT-08074
|
SparkFun
|
SparkFun Accessories These are small spring terminals. Open the aperature with the small arm insert the wire release the arm and the wire is held firmly in place. This is a good quick way to to interface to bare wires. Capable of higher current and more resilient than
|
|
Non-Stocked
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
|
|
SparkFun Accessories This is a basic 16 character by 2 line display. Black text on Green background. Utilizes the extremely common HD44780 parallel interface chipset (datasheet). Interface code is freely available. You will need 11 general I/O pins to interface to this
- LCD-00255
- SparkFun
-
1:
19,35 €
-
Non-Stocked Lead-Time 16 Weeks
|
Mouser Part No
474-LCD-00255
|
SparkFun
|
SparkFun Accessories This is a basic 16 character by 2 line display. Black text on Green background. Utilizes the extremely common HD44780 parallel interface chipset (datasheet). Interface code is freely available. You will need 11 general I/O pins to interface to this
|
|
Non-Stocked Lead-Time 16 Weeks
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
|
|
SparkFun Accessories This is a 12-pin multi-purpose interface cable from Xsens. This is the same cable that is included in the MTi-630R and MTi-670G IMU starter kits.
SparkFun COM-18562
- COM-18562
- SparkFun
-
1:
109,51 €
-
Non-Stocked
|
Mouser Part No
474-COM-18562
|
SparkFun
|
SparkFun Accessories This is a 12-pin multi-purpose interface cable from Xsens. This is the same cable that is included in the MTi-630R and MTi-670G IMU starter kits.
|
|
Non-Stocked
|
|
Min.: 1
Mult.: 1
|
|
|
|
|