-ar SparkFun Accessories

Results: 372
Select Image Part #
 Mfr.
Description Datasheet Availability Pricing (EUR) Filter the results in the table by unit price based on your quantity.
Qty. RoHS ECAD Model Product
Type
SparkFun SparkFun Accessories Cherry MX Keyswitches are top-of-the-line mechanical keyboard switches. They re satisfyingly clicky reliable up to tens-of-millions of key presses and a standard in gaming and programming keyboards across the globe. This 'blue' version Cher 30In Stock
30On Order
Min.: 1
Mult.: 1
Switches
SparkFun SparkFun Accessories Electrolytic decoupling capacitors 100uF/25V. These capacitors are great transient/surge suppressors. Attach one between the power and ground of your project to ensure smooth power delivery. High quality radial electrolytic capacitors. 70In Stock
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories This is a 10-pin socket with 2mm pitch that mates with the popular XBee radio from Digi. This is the SMD version that we are currently using on our shields and breakout boards.Note:** **This item is sold as each not in pairs. 299In Stock
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories Looking to add MIDI to your project? This is a female 5-pin right-angle DIN 5/180? connector which will interface with most standard MIDI cables. The pins are spaced by just about 0.1" making these connectors easy to prototype with. The contacts 66In Stock
Min.: 1
Mult.: 1
Connectors
SparkFun SparkFun Accessories This is a simple jumper adapter cable that comes pre-terminated with a female JST connector on one end and a breadboard hookup pigtail on the other. This cable makes it easy to connect components with a JST connector to a breadboard or an Arduino-bas 5In Stock
Min.: 1
Mult.: 1
Breadboard Accessories JST to Breadboard Jumper (3-pin)
SparkFun SparkFun Accessories This is a simple SPDT slide switch - great for use as an ON/OFF button or just as a general control switch. The pins are spaced by 0.1" however they are incredibly thin making breadboard use not recommended. The switch is rated for 0.3A at 50VDC. 396In Stock
427On Order
Min.: 1
Mult.: 1

Switches
SparkFun SparkFun Accessories These nylon standoffs are 3/8" long and tapped for a 4-40 screw. These are great for mounting your board in an enclosure or just getting it up off the table. The black nylon will give your project a very sessy look.Sold in packs of 10. Check below f 12In Stock
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories Your basic 7-segment LED. Common anode. Two decimal points but only the one on the right is wired. Digit height is 0.6". Overall height is 1"Documents:Datasheet Arduino Library (Thanks Derek!) 20In Stock
Min.: 1
Mult.: 1
Displays 7-Segment Display
SparkFun SparkFun Accessories You'll have no need for a screwdriver with this terminal! This is a 4-pin Latch Terminal with 5mm pitch pins. Each pin is rated up to 250V @ 11A and will line up well with the standard 0.19" spacing. Please note that the pins are thick enough (1.20mm
Datasheet
9In Stock
Min.: 1
Mult.: 1

Connectors Latch Terminal - 5mm Pitch (4-pin)
SparkFun SparkFun Accessories LilyPad Slide Switch 20In Stock
Min.: 1
Mult.: 1

Switches
SparkFun SparkFun Accessories This is a SparkFun exclusive! These are 12" long jumper wires terminated as male to male. Use these to jumper from any female header on any board. Multiple jumpers can be connected next to one another on a 0.1" header. Comes in one pack of ten jumper 8In Stock
Min.: 1
Mult.: 1
Wire & Cable Jumper Wire
SparkFun SparkFun Accessories This is a USB to TTL Serial Cable which allows for a simple way to connect TTL interface devices to USB. The I/O pins of this cable are configured to operate at 3.3V specifically with a Raspberry Pi with each serial pin broken apart. Thanks to its se 50In Stock
Min.: 1
Mult.: 1
Cables
SparkFun SparkFun Accessories Sometimes when you have too many choices it's hard to make a good decision. In fact there are times when you just want a bag of LEDs just one of each that's all you want. Well too bad you are getting two of each! The LED Rainbow Pack contains tw 10In Stock
Min.: 1
Mult.: 1
Optoelectronics LED
SparkFun SparkFun Accessories This is a simple LED-illuminated tactile button with a clear cap. It's just like a basic tactile button but it lights up white! So now you can get visual feedback or light up your project. These have a 12mm body and are rated for 50mA. They don't e
Datasheet
3In Stock
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories This is a SparkFun exclusive! These are 12" long jumper wires terminated as male to male. Use these to jumper from any female header on any board. Multiple jumpers can be connected next to one another on a 0.1" header. Comes in five packs of twenty j 4In Stock
More Info Available
Min.: 1
Mult.: 1
Wire & Cable Jumper Wire
SparkFun SparkFun Accessories These are very thin variable potentiometers. By pressing down on various parts of the strip the resistance linearly changes from 100Ohms to 10 000Ohms allowing the user to very accurately calculate the relative position on the strip. Can be used as 6In Stock
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories These are very thin variable potentiometers. By pressing down on various parts of the strip the resistance linearly changes from 100Ohms to 10 000Ohms allowing the user to very accurately calculate the relative position on the strip. Can be used as 15In Stock
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories Resistor 10K Ohm 1/4 Watt PTH - 20 pk 213In Stock
Min.: 1
Mult.: 1

Resistors Resistor 10K Ohm 1/4 Watt PTH - 20 pack (Thick Leads)
SparkFun SparkFun Accessories This is a perfect choice if you are in need of a heavy duty push button! These metal push buttons are a very tough small panel-mount latching switch with an illuminated red LED ring. It is a SPDT with 16mm threading and 1mm pitch. This button is pe 2In Stock
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories Soldering Iron Stand 5In Stock
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories The QRE1113 is a small IR reflectance sensor. This sensor is often used in line following robots because if it can sense if a surface is white or black.There are four pins on the QRE1113 - two control the IR emitting LED while the other two are the 15In Stock
Min.: 1
Mult.: 1
Sensors
SparkFun SparkFun Accessories These 33mm (1.3") spring loaded pogo pins are great for programming and applications where you don't always want headers soldered onto your boards. We use them for our programming jigs in production. The pins fit snugly into most standard perf board
Datasheet
26In Stock
More Info Available
Min.: 1
Mult.: 1
SparkFun SparkFun Accessories USB Mini-B Cable 6' Mini-B Cable 6'
Datasheet
10In Stock
Min.: 1
Mult.: 1

Cables
SparkFun SparkFun Accessories This is a super small 2x5 pin male PTH header. This header is in the common configuration for JTAG applications. Each pin has a spacing of 1.27mm in between each other and can be cut down to smaller increments if the need arises.
Datasheet
45In Stock
Min.: 1
Mult.: 1

Connectors Header - 2 x 5 Pin, Male
SparkFun SparkFun Accessories These stackable headers are made to work with the SparkFun ESP32 Thing Plus to connect to shield with a Feather footprint. This set includes one 12-pin and one 16-pin header; the pins are spaced by 0.1".Each set of headers allows you to stack Feather
Datasheet
12In Stock
More Info Available
Min.: 1
Mult.: 1

Connectors Feather Stackable Header Kit