|
|
SparkFun Accessories For a long time we've had small 7-segment displays and *huge *7-segment displays but now we finally have something in between. These 20mm 4-digit 7-segment displays are big enough to see from a distance but not so big that you'd have trouble finding
- COM-11405
- SparkFun
-
Restricted Availability
|
Mouser Part No
474-COM-11405
|
SparkFun
|
SparkFun Accessories For a long time we've had small 7-segment displays and *huge *7-segment displays but now we finally have something in between. These 20mm 4-digit 7-segment displays are big enough to see from a distance but not so big that you'd have trouble finding
|
|
|
|
|
|
|
Displays
|
7-Segment Display
|
|
|
|
SparkFun Accessories 7-Segment Serial Display - Blue
- COM-11442
- SparkFun
-
Restricted Availability
|
Mouser Part No
474-COM-11442
|
SparkFun
|
SparkFun Accessories 7-Segment Serial Display - Blue
|
|
|
|
|
|
|
Displays
|
7-Segment Display
|
|
|
|
SparkFun Accessories These color-changing LEDs take the work out of creating crazy flashy blinky... ness. Simply apply power and the LED will cycle through the RGB colorspace: no external controller necessary! These bright and festive LEDs make great decorations LED "
- COM-11451
- SparkFun
-
Restricted Availability
|
Mouser Part No
474-COM-11451
|
SparkFun
|
SparkFun Accessories These color-changing LEDs take the work out of creating crazy flashy blinky... ness. Simply apply power and the LED will cycle through the RGB colorspace: no external controller necessary! These bright and festive LEDs make great decorations LED "
|
|
|
|
|
|
|
Optoelectronics
|
LED
|
|
|
|
SparkFun Accessories This inline switch is great when you just want a simple on/off toggle switch that's already enclosed. Inside is a simple rocker switch with solder terminals with crimp strain relief. Attach some wires solder them in place and press-fit the enclosur
- COM-11477
- SparkFun
-
Restricted Availability
|
Mouser Part No
474-COM-11477
|
SparkFun
|
SparkFun Accessories This inline switch is great when you just want a simple on/off toggle switch that's already enclosed. Inside is a simple rocker switch with solder terminals with crimp strain relief. Attach some wires solder them in place and press-fit the enclosur
|
|
|
|
|
|
|
Switches
|
|
|
|
|
SparkFun Accessories We use barrel jacks a lot around here and sometimes we need to pop a switch into the mix. That usually means hacking up a perfectly good barrel jack extension cable but the whole point of using the barrel jacks was so that we wouldn't have to hack t
- COM-11705
- SparkFun
-
Restricted Availability
|
Mouser Part No
474-COM-11705
|
SparkFun
|
SparkFun Accessories We use barrel jacks a lot around here and sometimes we need to pop a switch into the mix. That usually means hacking up a perfectly good barrel jack extension cable but the whole point of using the barrel jacks was so that we wouldn't have to hack t
|
|
|
|
|
|
|
Switches
|
|
|
|
|
SparkFun Accessories These plastic LED holders have a black finish and only need the LED and the holder to be snapped into place easily and effectively no screwing anything into place. These LED holders accept a 5mm LED and mount into an 19/64" diameter hole.
- COM-11840
- SparkFun
-
Restricted Availability
|
Mouser Part No
474-COM-11840
|
SparkFun
|
SparkFun Accessories These plastic LED holders have a black finish and only need the LED and the holder to be snapped into place easily and effectively no screwing anything into place. These LED holders accept a 5mm LED and mount into an 19/64" diameter hole.
|
|
|
|
|
|
|
|
|
|
|
|
SparkFun Accessories These are bare non-addressable 1 meter long RGB LED strips that come packed with 60 5060 LEDs per meter. As these are bare LED strips that have no protective coating your project won't be water proof but there is access to each 5060 LED and each str
- COM-12021
- SparkFun
-
Restricted Availability
|
Mouser Part No
474-COM-12021
|
SparkFun
|
SparkFun Accessories These are bare non-addressable 1 meter long RGB LED strips that come packed with 60 5060 LEDs per meter. As these are bare LED strips that have no protective coating your project won't be water proof but there is access to each 5060 LED and each str
|
|
|
|
|
|
|
Optoelectronics
|
LED
|
|
|
|
SparkFun Accessories We know this looks like a lot of our other LEDs but it's not! This is a PTH Addressable RGB LED with a WS2812 control IC built right into the LED. This PTH version is incredibly similar to its SMD cousin except it is a lot simpler to solder into yo
- COM-12877
- SparkFun
-
Restricted Availability
|
Mouser Part No
474-COM-12877
|
SparkFun
|
SparkFun Accessories We know this looks like a lot of our other LEDs but it's not! This is a PTH Addressable RGB LED with a WS2812 control IC built right into the LED. This PTH version is incredibly similar to its SMD cousin except it is a lot simpler to solder into yo
|
|
|
|
|
|
|
Optoelectronics
|
LED
|
|
|
|
SparkFun Accessories This is the Magnetic Door Switch Set a small reed switch assembly specifically designed to alert you when doors drawers or any other aperture opens. These types of switches are primarily used in home security systems. One half of the assembly set
- COM-13247
- SparkFun
-
Restricted Availability
|
Mouser Part No
474-COM-13247
|
SparkFun
|
SparkFun Accessories This is the Magnetic Door Switch Set a small reed switch assembly specifically designed to alert you when doors drawers or any other aperture opens. These types of switches are primarily used in home security systems. One half of the assembly set
|
|
|
|
|
|
|
Switches
|
|
|
|
|
SparkFun Accessories You don't have to worry about adding a resistor to an LED if you get an LED with a built in resistor! This pack of 25 red 5mm LEDs will help alleviate any frustrations you've had with accidentally burning them out by having a resistor in the diode it
- COM-14560
- SparkFun
-
Restricted Availability
|
Mouser Part No
474-COM-14560
|
SparkFun
|
SparkFun Accessories You don't have to worry about adding a resistor to an LED if you get an LED with a built in resistor! This pack of 25 red 5mm LEDs will help alleviate any frustrations you've had with accidentally burning them out by having a resistor in the diode it
|
|
|
|
|
|
|
Optoelectronics
|
LED - Red with Resistor
|
|
|
|
SparkFun Accessories LilyPad Button Board
- DEV-08776
- SparkFun
-
Restricted Availability
|
Mouser Part No
474-DEV-08776
|
SparkFun
|
SparkFun Accessories LilyPad Button Board
|
|
|
|
|
|
|
|
|
|
|
|
SparkFun Accessories This is 12 meters of smooth conductive thread spun from stainless steel fiber and wound on a plastic bobbin. Use it to sew up all of your e-textile projects. This small bobbin is a great way to get into wearable electronics without the upfront cost o
- DEV-13814
- SparkFun
-
Restricted Availability
|
Mouser Part No
474-DEV-13814
|
SparkFun
|
SparkFun Accessories This is 12 meters of smooth conductive thread spun from stainless steel fiber and wound on a plastic bobbin. Use it to sew up all of your e-textile projects. This small bobbin is a great way to get into wearable electronics without the upfront cost o
|
|
|
|
|
|
|
|
|
|
|
|
SparkFun Accessories Arduino ProtoShield- Bare PCB
- DEV-13819
- SparkFun
-
1:
5,98 €
-
12In Stock
|
Mouser Part No
474-DEV-13819
|
SparkFun
|
SparkFun Accessories Arduino ProtoShield- Bare PCB
|
|
12In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
Shields
|
ProtoShield
|
|
|
|
SparkFun Accessories ProtoShield Kit
- DEV-13820
- SparkFun
-
1:
13,78 €
-
7In Stock
|
Mouser Part No
474-DEV-13820
|
SparkFun
|
SparkFun Accessories ProtoShield Kit
|
|
7In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
Shields
|
ProtoShield
|
|
|
|
SparkFun Accessories LilyPad Coin Cell Battery Holder 20mm
- DEV-13883
- SparkFun
-
Restricted Availability
|
Mouser Part No
474-DEV-13883
|
SparkFun
|
SparkFun Accessories LilyPad Coin Cell Battery Holder 20mm
|
|
|
|
|
|
|
Battery Holders
|
Battery Holder - Coin Cell
|
|
|
|
SparkFun Accessories LilyPad LED White (5pcs)
- DEV-13902
- SparkFun
-
Restricted Availability
|
Mouser Part No
474-DEV-13902
|
SparkFun
|
SparkFun Accessories LilyPad LED White (5pcs)
|
|
|
|
|
|
|
|
|
|
|
|
SparkFun Accessories LilyPad LED Rainbow (6 colors)
- DEV-13903
- SparkFun
-
Restricted Availability
|
Mouser Part No
474-DEV-13903
|
SparkFun
|
SparkFun Accessories LilyPad LED Rainbow (6 colors)
|
|
|
|
|
|
|
|
|
|
|
|
SparkFun Accessories LilyPad LED Pink (5pcs)
- DEV-14010
- SparkFun
-
Restricted Availability
|
Mouser Part No
474-DEV-14010
|
SparkFun
|
SparkFun Accessories LilyPad LED Pink (5pcs)
|
|
|
|
|
|
|
|
|
|
|
|
SparkFun Accessories LilyPad LED Green (5pcs)
- DEV-14011
- SparkFun
-
Restricted Availability
|
Mouser Part No
474-DEV-14011
|
SparkFun
|
SparkFun Accessories LilyPad LED Green (5pcs)
|
|
|
|
|
|
|
|
|
|
|
|
SparkFun Accessories LilyPad LED Blue (5pcs)
- DEV-14012
- SparkFun
-
Restricted Availability
|
Mouser Part No
474-DEV-14012
|
SparkFun
|
SparkFun Accessories LilyPad LED Blue (5pcs)
|
|
|
|
|
|
|
|
|
|
|
|
SparkFun Accessories LilyPad LED Red (5pcs)
- DEV-14013
- SparkFun
-
Restricted Availability
|
Mouser Part No
474-DEV-14013
|
SparkFun
|
SparkFun Accessories LilyPad LED Red (5pcs)
|
|
|
|
|
|
|
|
|
|
|
|
SparkFun Accessories LilyPad LED Yellow (5pcs)
- DEV-14014
- SparkFun
-
Restricted Availability
|
Mouser Part No
474-DEV-14014
|
SparkFun
|
SparkFun Accessories LilyPad LED Yellow (5pcs)
|
|
|
|
|
|
|
|
|
|
|
|
SparkFun Accessories SparkFun Qwiic Shield for Arduino
- DEV-14352
- SparkFun
-
1:
6,83 €
-
8In Stock
|
Mouser Part No
474-DEV-14352
|
SparkFun
|
SparkFun Accessories SparkFun Qwiic Shield for Arduino
|
|
8In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
Shields
|
Qwiic Connect System
|
|
|
|
SparkFun Accessories The SparkFun Qwiic Adapter provides the perfect means to make any old I2C board into a Qwiic-enabled board. This adapter breaks out the I2C pins from the Qwiic connectors to pins that you can easily solder with your favorite I2C-enabled device.The Qw
- DEV-14495
- SparkFun
-
1:
1,38 €
-
|
Mouser Part No
474-DEV-14495
|
SparkFun
|
SparkFun Accessories The SparkFun Qwiic Adapter provides the perfect means to make any old I2C board into a Qwiic-enabled board. This adapter breaks out the I2C pins from the Qwiic connectors to pins that you can easily solder with your favorite I2C-enabled device.The Qw
|
|
|
|
Min.: 1
Mult.: 1
|
|
|
Adapters
|
Qwiic Adapter
|
|
|
|
SparkFun Accessories The LilyPad E-Sewing ProtoSnap is a great way to explore how buttons and switches behave in simple e-sewing circuits before crafting your project. Like other LilyPad ProtoSnap series boards the individual pieces of the board are pre-wired --- allowi
- DEV-14546
- SparkFun
-
1:
6,24 €
-
3In Stock
|
Mouser Part No
474-DEV-14546
|
SparkFun
|
SparkFun Accessories The LilyPad E-Sewing ProtoSnap is a great way to explore how buttons and switches behave in simple e-sewing circuits before crafting your project. Like other LilyPad ProtoSnap series boards the individual pieces of the board are pre-wired --- allowi
|
|
3In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
Boards
|
LilyPad E-Sewing ProtoSnap
|
|